Long Range WiFi Access Point Panel
Price Match Promise
High-power outdoor WiFi transmission bridge
Transmit 2GHz WiFi outdoors over much longer distances using this panel. Connect to WiFi cameras that are positioned far away from the building containing your WiFi router.
Thanks to the dual high-gain 14dBi antennas the panel can transmit over large areas.
Power over Ethernet
No external power required thanks to PoE, allowing you to power up the panel using just one network cable.
Comprehensive protection against severe outdoor environments including lightning protection and weatherproof IP65-rated casing.
Supports operation in sub-zero conditions.
Supports the hiding of the WiFi's SSID so that can't be detected by other users.
Mount these lightweight units to a wall or pole-mount high up for the best coverage.
This panel creates a WiFi access point network on the 2GHz band and is designed for mounting outside in all sorts of weather. These are great for allowing you to transmit camera feeds from your WiFi cameras to another part of the site – ideal if you have a large site where running lots of cabling is impractical.
Recommended for advanced users only.
† Provides up to a 200-metre range in clear line-of-sight. This path must be entirely obstacle-free.
- 1x 2GHz WiFi panel
- 1x Stainless steel ties
- 1x PoE injector
- Quick installation guide
Hardware specification: Qualcomm QCA9531 650Mhz industrial-grade CPU; DDR: 64MB; Flash: 8MB; Power Amplifier Chipset: SE2576L
Antenna: 2x Built-in 14dBi
Wireless standard: IEEE 802.11 b/g/n
RF parameters: Output power (max): 500mW (27dBm); Receiving sensitivity (max): -96dBm; Frequency: 2.3GHz–2.7GHz
Data rate: 300 Mbps
Modulation mode: DSSS: DBPSK@1Mbps, DQPSK@2Mbps, CCK@5.5/11Mbps; OFDM: BPSK@6/9Mbps, QPSK@12/18Mbps,16-QAM@24Mbps, 64-QAM@48/54Mbps; MIMO-OFDM: MCS 0-15
Transmission rate: 11b: 1, 2, 5.5, 11Mbps; 11g: 6, 9, 12, 18, 24, 36, 48, 54Mbps; 11n: MCS0-MCS15 (20MHz&40MHz Analog Bandwidth); 20MHz: 144.4Mbps 40MHz: 300Mbps
Physical ports: 1x 10/100Mbps WAN RJ45 Ethernet Port; 1x 10/100Mbps LAN RJ45 Ethernet Port; 1x PoE Output Slide Switch; 1x RESET Button
Indicator: 8x Indicators: Power/WAN/LAN/WiFi/Signal Strength
Power: Power Supply: Support 802.3af/at; Power Adapter: 48V POE Power Adapter
Power consumption (max): <8W
IP Index: IP65
Lightning protection: Yes, 2KV
Case: Plastic case (imported ABS material)
Dimensions; 262x80x53 mm
Operating temperature: -40 to 55C
Storage temperature: -50 to 75C
Operating humidity: 10%-90% RH non-condensing
Storage humidity: 5%-90% RH non-condensing